X

MF-800 LLDPE LDPE HDPE MDPE Pulverizer grinding machine

LLDPE LDPE HDPE MDPE Pulverizer grinding machine can process and grind polyethylene PVC, polyethylene PE, polypropylene PP, polystyrene PS, low-pressure polyethylene HDPE, high-pressure polyethylene LDPE, propylene butadiene styrene ABS, foamed PE, PVC, SBS, EVA, Powder equipment for soft PVC, other thermoplastics, rubber, leather, plant fiber and other materials. It is also a powder processing equipment for recycling scrap waste during the production of plastic products.

Share:

Description

The performance characteristics of LLDPE LDPE HDPE MDPE Pulverizer grinding machine:

  • A1: With water cycle and wind cooling, the machine can be applied into processing heat sensitive material.
  • A2: With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).
  • A3: Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.
  • A4: With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage.
  • A5: With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.
  • A6: The new disc design is used, high-yield, strong resistance and the life of this grinding disc is double than the ordinary.
  • A7: The use of newly designed professional bearings, and reach a high rotation rate. At the same time using only one drive motor, to ensure the efficient grinding crash, which greatly saves the time and operation of machinery and control engineering.
  • A8: Installation and maintenance easy, open the door to cover clean-up.
  • A9).Milling process of the whole seal, without dust leakage.

Technical Parameter

Vertical type:

Item Model MF400 MF500 MF600 MF800
Diameter 400mm 500mm 600mm 800mm
Motor power 30kw 45kw 55kw 75kw
Blade material SKD-11 or D53 SKD-11 or D53 SKD-11 or D53 SKD-11 or D53
Capacity 100kg/h 200kg/h 250kg/h 350kg/h

Recommended Products