The PE pipe extrusion production line can normally produce HDPE/PE pipes, and can also produce PP and PPR pipes on a small HDPE pipe production line. The production process of PE pipe extrusion line is the same as PPR and PP pipe, using the same extruder and die, when you want to reduce investment, you can produce in one pipe production line. Some plastic material is wasted in the production of the same pipe, because each material has a slightly different melting point and MFI, so we need some material to clean the single screw barrel.
The advantage of Plastic PE pipe production Line:
A1. High lineal extrusion speed, big capacity and low power consumption, and achieved multi-layers co-extrusion with 1-5 layers.
A2. The copper bush is more wear-resisting and prevent material leakage which can guarantee a stable running of extruder.
A3. Material feed via spiral groove, efficient transmission and can effectively reduce back-pressure on extruder.
A4. Unique design (barrier, shearing and mixing zone) guarantees a uniformed plasticizing effect, and can reduce the pressure on the screw which guarantees a high speed and stable output capacity.
A5. High torque gear box has a smart figuration, compact construction, low noise, high carrying capacity, high transmission efficiency can assure long-time trouble-free operation;
A6. PCA(pipe air cooling system) of die head largely increase the extrusion speed and decrease the cooling length of extrusion line, and improve quality of inner pipe surface;
A7. Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently;
A8. Chip-free cutter ensuing flat and smooth cutting surface of pipe.
Production line
|
Diameter range (mm)
|
Extruder type
|
Max. Capacity(kg/h)
|
Max. Haul off speed(m/min.)
|
Extrusion power (KW)
|
38D Series High Efficient Production Line
|
|||||
SJ-63Single
|
Ф20-63
|
ATD60/38
|
280
|
20
|
90
|
SJ-63Dual
|
Ф20-63
|
ATD60/38
|
360
|
18×2
|
110
|
SJ-110Single
|
Ф20-110
|
ATD60/38
|
280
|
20
|
90
|
SJ-110Dual
|
Ф20-110
|
ATD75/38
|
450
|
18×2
|
160
|
SJ-160Single
|
Ф40-160
|
ATD60/38
|
360
|
12
|
110
|
SJ-250Single
|
Ф50-250
|
ATD75/38
|
450
|
10
|
160
|
33D Series Classical Production Line
|
|||||
SJ-63Single
|
Ф20-63
|
SJ65/33
|
180
|
10
|
55
|
SJ-110Single
|
Ф20-110
|
SJ65/33
|
180
|
10
|
55
|
SJ-160Single
|
Ф50-160
|
SJ75/33
|
300
|
6
|
110
|
SJ-250Single
|
Ф90-250
|
SJ75/33
|
300
|
4
|
110
|