SHR-1300L High speed mixture machine manufacturer

The high-speed mixture is mainly suitable for the mixing of calcium powder; the mixing of PTFE; the mixing of PVC; the mixing of ternary lithium battery materials; the lithium iron phosphate battery, etc. It is widely used in plastics, chemical industry, lithium battery and other industries. At the same time, laboratory high-speed mixers are widely used in national defense industry, universities, scientific research teams, etc. It is especially suitable for high uniformity mixing of powdery and granular materials. Mixing of shear-sensitive crystalline powders and bulk products, as well as better mixing of liquids into solids (spray device) is more uniform. Efficient mixing of solid-powder, powder-powder, and powder-liquid.



The high-speed mixture is composed of a machine base, a transmission system, an electrical control system, a multi-directional motion mechanism, a mixing barrel and other components. The mixing barrel barrel has a unique design, and all parts of the barrel are arc transitions. The direct contact part of the mixer and the material adopts Made of stainless steel, the inner and outer walls of the barrel are precision polished. After the cylinder is loaded, driven by the driving shaft, it performs compound motions such as translation, rotation and tumbling. Mutual flow, diffusion, accumulation, doping, in order to achieve the purpose of uniform mixing. Therefore, the high-speed mixer can mix powdery or granular materials with good fluidity very uniformly, so that the mixed materials can achieve the best mixing state.​​

Features of high speed mixture:
A1: The high-speed mixer adopts all-copper wire high and low speed motor, starts at low speed, runs at high speed, and the motor is equipped with thermal protection switch;
A2: Arc design at the bottom of the barrel, no dead angle for stirring; double-layer sealing of the barrel cover, no dust flying;
A3: Imported bearings, PTFE seal, good sealing performance and long life;
A4: The lid of the pot is sealed with double concave and convex, no material leakage.
A5: The outer body of the pot is covered with an insulating layer to reduce heat loss;
A6: The blades are made of thickened stainless steel castings, which are balanced and finely calibrated to ensure high-speed rotation without eccentricity;
A7: Electric heating/self-friction heating and other methods are optional to save energy consumption;
A8: Equipped with an integrated electric cabinet, when the timing and temperature reach the preset conditions, the cover will be automatically opened and discharged to improve efficiency;

Technical Parameter

Type Volume (L) Effective
Volume (L)
Mixing time
Rotate speed
SHR-5A 5 3 6-8 1500 1.1 10
SHR-10A 10 7 6-8 1500 3 20
SHR-25A 25 20 6-8 1500 5.5 50
SHR-50A 50 35 6-10 750/1500 7/11 100
SHR-100A 100 75 6-10 650/1300 14/22 200
SHR-200A 200 150 6-10 475/950 30/42 400
SHR-300A 300 225 6-10 430/860 40/55 500
SHR-500A 500 375 8-12 330/660 55/75 800
SHR-800A 800 520 8-12 395/790 83/110 1400
SHR-1000A 1000 650 8-14 330/660 90/132 1600
SHR-1300A 1300 850 8-14 330/660 132/200 2100

Recommended Products

Please enter your message