Description

Features of Laboratory mixer:
A1: The main shaft seal of the laboratory mixer is a three-layer skeleton oil seal made of imported durable rubber, and has an oil filling device, which has good sealing effect and long service life.

A2: The discharge valve of the laboratory mixer adopts a plunger-type material gate. The inner surface of the door block is closely matched with the inner wall of the container, and there is no mixing dead zone, so that the materials are mixed evenly. The material door plug adopts the end face sealing method, and the sealing is reliable.

A3: The laboratory mixer deflector is used to enhance the mixing effect. The deflector has an approximately streamlined surface, and the deflector affects the circulation of the material, and its favorable position depends on the material to be mixed. The guiding angle of the deflector in the pot can be adjusted freely and vertically, and the external clamping device can fix the angle of the deflector. The thermocouple is assembled in the deflector, its connection is drawn out through the conduit to the terminal head, and connected to the temperature meter of the electric control box. The temperature of the material can be fed back and read on the indicator, which is used to automatically control the automatic control of the discharge port. unloading.

A4: The lid of the laboratory mixer is cast from aluminum alloy. The inner surface is polished. After it starts from the cylinder, it can be rotated vertically and horizontally clockwise (rotating at 70°C). The cover has holes for adding resin, plasticizer, stabilizer and ventilation holes. Users can arrange according to their own needs. . Do not use too much force when turning the lid to avoid bumping the wall of the pot. In order to prevent personal accidents caused by the rotation of the stirring paddle, the motor protection is specially set up.

Technical Parameter