The Plastic milling machine device includes a feeding mechanism and a grinding mechanism;
A1: The feeding mechanism of the PVC plastic mill includes a frame. The frame is equipped with a feeding trough. The two ends of the feeding trough are respectively provided with a storage tank and a conveying trough, and a conveyor belt between adjacent ribs There is a magnet;
A2: The feeding hopper of the PVC Pulverizer mill is located below the conveying trough. The material crushed into lumps is sent to the grinding mechanism through the feeding mechanism for grinding, and the magnet set on the conveyor belt can absorb the material in the conveyed material. Iron impurities, reduce the content of iron impurities entering the next process, avoid the damage of iron impurities to the next equipment, and improve the quality of PVC raw materials;
A3: PVC pulverizer mill mounting plate; one side of the first motor is fixedly installed with the mill shell at the top of the mounting plate, and the inner movable sleeve of the mill shell is equipped with the first rotating shaft, the PVC plastic mill, through A cooling box and a baffle plate are set on the conveying pipe. By conveying the flowing water inside the cooling box, the inside of the conveying pipe can be cooled down and prevent the PVC plastic from flocculating, agglomerating, not feeding, and turning off the fan bearing. And other issues, thereby improving the practicality of the mill.
Maintenance of plastic milling machine:
A1: Open the door cover regularly, check the blade, whether the fastening nut and the cover nut are loose, if they are loose, they must be tightened.
A2: The bearing of the main engine must use NSK high temperature resistant grease, and other types of lubricating oil are easy to solidify in winter.
A3: Check the inner wall of the air duct and remove the hardened dust as needed.
A4: After the grinding disc has been used for a certain period of time, its cutting edge is ground flat or the output has dropped greatly, then the grinding disc can be removed, re-grinded, and then re-installed to continue use.