SMF-400 PVC pulverizer grinding machine manufacturer equipment

The minimum diameter of the cutter head of the SMF PVC grinder machine is 400mm and the maximum is 800mm, which belongs to the turbo-type pulverizer series. Mainly used in the field of hard PVC recycling, such as the recycling of defective PVC pipes, profiles, plates and leftover materials.



Features of Plastic Pulverizer:

A1: Closed dust treatment to minimize the dust in the workshop.
A2: Adjustable electromagnetic vibration feeding, the current is more stable when the mill is running.
A3: The discharge port of the cyclone separator is equipped with a shut-off fan, and there is basically no dust leakage.
A4: Use imported bearings, oil seals, and high-quality grease to ensure long-term normal operation of the equipment.
A5: The whole grinding chamber is water-cooled to ensure that the properties of the materials do not change during the crushing process.
A6: The production efficiency is high, and the output is significantly higher than that of the old turbo mill.
A7: The door of the grinding chamber can be opened, which can quickly clean the grinding chamber and quickly and easily replace the movable knife and gears.
A8: High-quality accessories, high manufacturing requirements, and strict manufacturing process ensure the quality of the equipment.
A9: Simple structure, reliable and durable. The modular design allows the equipment to be installed in different directions according to the size of the workshop.

The working principle of SMF-400 PVC grinding machine:

A1: The working part of the machine is the cutter head. The high-speed particles are partially crushed after impacting the tooth plate and drawn out by suction, while the larger particles continue to impact and are drawn out after crushing. This reduces the load on the cutter head, improves the grinding efficiency, and enables the powder to be evenly cooled.
A2: Low temperature is the main advantage of this machine. In terms of thermal power equivalent: it is converted into 860 kcal of heat per hour after the work is done. This machine is external ventilation. The air volume reaches 50m/KW, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling. The inlet temperature of the cold water is required to be no more than 25°C, and the outlet water temperature is no more than 45°C. In summer, the cooling water flow should be appropriately increased to lower the temperature.

Technical Parameter

Modle Motor Power
Fan motor power
Vibrator motor power
SSMF-500 37-45 3 0.55 100-300 3500X1300X3700 1600
SSMF-600 45-55 5.5 0.75 200-500 3700x1450x3700 1800
SSMF-700 55-75 7.5 0.75 260-600 4100x1600x3800 2000
SSMF-800 75-90 7.5 0.75 300-700 4300x1700x4000 3200
SSMF-1000 90-110 11 1.1 400-900 5000x2000x4300 3600

Recommended Products