The most commonly used knife type of Plastic PVC crushing grinder :
The working principle of Plastic PVC SPC micronizer milling machine:
A1: The working part of the machine is the cutter head. The high-speed particles are partially crushed after impacting the tooth plate and drawn out by suction, while the larger particles continue to impact and are drawn out after crushing. This reduces the load on the cutter head, improves the grinding efficiency, and enables the powder to be evenly cooled.
A2: Low temperature is the main advantage of this machine. In terms of thermal power equivalent: it is converted into 860 kcal of heat per hour after the work is done. This machine is external ventilation. The air volume reaches 50m/KW, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling. The inlet temperature of the cold water is required to be no more than 25°C, and the outlet water temperature is no more than 45°C. In summer, the cooling water flow should be appropriately increased to lower the temperature.