SMW-600 PE pulverizer machine

The high-quality LDPE plastic grinding milling machine adopts Germany advanced technology, the main transmission part is cooled by circulating water, the grinding disc chamber is made of 304 stainless steel, Japan NTN bearing, SKD11 grinding disc material has good wear resistance and uniform grain size, the grinding disc gap is adjusted by bolts, and the operation is convenient and simple. High precision, the discharge pipe and cooling pipe are made of 304 stainless steel, which is durable.



SMW-600 PE pulverizer machine /Grinding disc mill

A1:The new disc design, high output, high wear resistance, life is twice the life of ordinary discs.

A2:High speed achieved with newly designed special bearings

A3:Easy to install and maintain, open the door cover to clean

A4:The milling process is completely sealed and there is no dust leakage.

The working principle of the grinding disc mill:

After the material is pulverized to the required particle size, the material is sent to the storage hopper by the hoist, and then the material is uniformly and continuously fed into the Raymond mill main grinding chamber through the vibrating feeder, and the grinding roller swings outward due to the centrifugal force during the rotation. Pressing on the grinding ring, the blade shovels the material and sends it between the grinding roller and the grinding ring, which is crushed by the rolling of the grinding roller. The fine powder after grinding of the material is brought into the analysis machine for sorting with the circulating wind of the blower, and the finely coarse material falls back to the regrind, and the qualified fine powder enters the finished cyclone powder collector with the airflow, and is discharged through the powder discharging pipe. That is the finished product. In the Raymond grinding room, there is a certain amount of moisture in the material to be ground, heat is generated during grinding, water vapor evaporates, and the pipelines of the whole machine are not tightly connected. The outside air is sucked in, so that the circulating air pressure is increased to ensure the mill is under negative pressure. Working in the state, the increased air flow is discharged into the dust remover through the residual air duct, and is purified and discharged into the atmosphere.

The mill consists of a main machine, an analysis machine, a blower, a finished cyclone, a pipe device, and a motor. The main machine is composed of a frame, an inlet volute, a blade, a grinding roller, a grinding ring, a casing and a motor. Auxiliary equipment includes jaw crusher, bucket elevator, electromagnetic vibration feeder, electric control cabinet, etc. Users can flexibly choose according to the site conditions.

The design is reasonable, the cross section of the grinding cavity is small, and the material is immediately caught and ground as soon as it enters, and it is quickly removed, avoiding the temperature rise and decomposition of the material, thereby achieving higher yield.

Technical Parameter

Recommended Products