Description

The principle of plastic PVC micronizer machine:
The cutter head is driven by the spindle equipped with bearings. Driven by the cutter head, the moving knife rotates at a high speed and is tangent to the fixed knife, so that the incoming materials collide strongly and are ground into powder. The combination of wind and water cooling is effective The crushing temperature of the material is controlled to ensure that the quality of the crushed material will not change. The automatic feeding, automatic discharging and automatic sorting system are configured, which greatly reduces the labor intensity. The whole grinding process is completely closed without dust leakage. The door needs to be opened for maintenance.

Structural features of  plastic PVC micronizer machine:
A1: The new cutter structure, the strong collision between materials, under the action of the high-speed centrifugal force of the rotating blade, the shearing and crushing of the fixed blade plate.
A2: The combination of air and cold water cooling effectively controls the material crushing temperature and solves the problems of deterioration, melting and carbonization of heat-sensitive plastics after crushing.
A3: The grinding chamber of this machine can be opened, which is convenient for maintenance and replacement of tools.
A4: Equipped with vibrating screening equipment, materials that do not meet the requirements are returned to the mill for re-grinding.
A5: Equipped with negative pressure feeding and dust removal device, which can improve the material discharge speed, avoid the wear of the fan impeller caused by the positive pressure discharge in the past, and remove the dust during the milling process. effective recovery.
A6: The electrical control part adopts well-known domestic brands, and the host part adopts the star-delta starting method to reduce the starting current and increase the service life of the motor.

Technical Parameter