X

SMW-800 Industrial Plastic SPC pulverizer miller manufacturer for sheet board

Industrial plastic SPC pulverizer is used to pulverize waste SPC floors, PVC ceilings, PVC pipes, PVC profiles, PVC marble slabs, PVC profiles into fine powder. The rotor consists of several segments of discs and several blades. The material will be sheared, impacted and rubbed into powder. The screened fine powder will enter the product collector with the airflow, while the coarse powder will be returned to the grinding chamber for further grinding.

Share:

Description

Features of Plastic SPC pulverizer machine :

The Plastic SPC pulverizer milling machine device includes a feeding mechanism and a grinding mechanism;
A1: The feeding mechanism of the SPC plastic mill includes a frame. The frame is equipped with a feeding trough. The two ends of the feeding trough are respectively provided with a storage tank and a conveying trough, and a conveyor belt between adjacent ribs There is a magnet;

A2: The feeding hopper of the SPC Pulverizer mill is located below the conveying trough. The material crushed into lumps is sent to the grinding mechanism through the feeding mechanism for grinding, and the magnet set on the conveyor belt can absorb the material in the conveyed material. Iron impurities, reduce the content of iron impurities entering the next process, avoid the damage of iron impurities to the next equipment, and improve the quality of SPC raw materials;

A3: SPC pulverizer mill mounting plate; one side of the first motor is fixedly installed with the mill shell at the top of the mounting plate, and the inner movable sleeve of the mill shell is equipped with the first rotating shaft, the SPC plastic mill, through A cooling box and a baffle plate are set on the conveying pipe. By conveying the flowing water inside the cooling box, the inside of the conveying pipe can be cooled down and prevent the SPC plastic from flocculating, agglomerating, not feeding, and turning off the fan bearing. And other issues, thereby improving the practicality of the mill.

Technical Parameter

Model SMW-500 SMW-600 SMW-800
Motor power (kw) 37kw 55kw 75kw
Blow power (kw) 3kw 5.5kw 11kw
Voltage 380V, 50Hz
(according to customer)
380V, 50Hz
(according to customer)
380V, 50Hz
(according to customer)
Total power 41kw 52kw 90.5kw
Blade Dia. 500mm 600mm 800mm
Feeding material size Below 10mm Below 10mm Below 10mm
Output size 40-80mesh 40-80mesh 40-80mesh
Vibration model ZDS-800 ZDS-1000 ZDS-1200
Capacity 200-300kg/h 300-500kg/h 500-600kg/h
Machine size(mm) 2500*2000*3000mm 3200*2600*3200mm 3500*2400*4000mm

Recommended Products

Please enter your message