Turbo mixer machine is an important equipment for producing PVC/WPC/SPC products, and is widely used in PVC panels, plates, pipes, profiles, sheets, etc. At the same time, it can be equipped with a dumping station, a vacuum feeder, a dust collector, a large silo, a fully automatic vacuum weighing system, etc.; to improve the level of automation and reduce dust pollution.
A1: PVC/UPVC water supply and drainage pipe and electrical conduit manufacturing industry.
A2: PVC/WPC doors and windows and other profiles production system.
A3: PVC+ASA/PMMA glazed tile/wave tile/colonial tile extrusion system.
A4: PVC imitation marble profile/plate manufacturing industry.
A5: PVC sheet/board extrusion system.
A6: PP/PE filler masterbatch mixing system.
Features of SRL-Z series Turbo mixer machine:
A1: The temperature measurement accuracy of the mixing unit is good. This series of mixing units is equipped with 2 hot-spot couples, one for measuring the wall temperature of the inner barrel, and a thermocouple temperature isolation device to avoid the cooling water from affecting the temperature measurement accuracy of the thermocouple; the second measuring material It is equipped with a material cleaning device, which regularly removes the material adhered to the head of the thermocouple to ensure the accuracy of temperature measurement.
A2: The hinge structure device of the three-way position of the discharge cylinder of the mixing unit (through the professional 3D modeling calculation, the hinge opening operation is completed with the smallest space, which is simple and practical), which is convenient for customers to clean the plug material; the discharge port is equipped with air bag blowing gas device.
A3: The mixing unit adopts the structure of anti-coking material paddle. By designing the blade section into a streamlined shape, the coking of the material is avoided and the mixing quality of the material is improved.
A4: The mixing unit uses a high temperature flame to preheat the stainless steel blades first, and then adds a high-pressure airflow flame to atomize the tungsten carbide, and spray the tungsten carbide onto the surface of the workpiece at a high speed to form a high wear-resistant layer, which greatly improves the inner wall of the pot and the stirring blade. Abrasion resistance of leaves etc.
A5: The contact surface between the high-speed mixing unit and the material is made of 304 stainless steel, and mirror polished (roughness reaches 0.1μm).
A6: The cylinder cover of the high-speed mixer and the low-speed mixer adopts a column cover structure, which makes the opening of the mixer more stable and precise.
a7: The 4-point air blowing device is adopted at the interaction between the main shaft of the mixer and the barrel, which can effectively place the material into the main shaft bearing of the mixer, effectively prevent the material from contaminating the equipment, and improve the service life of the equipment.
|Total volume (L)||100/200||200/500||300/600||500/1000||800/1600|
|Effective Volume (L)||65/130||150/320||200/360||375/650||600/1024|
|Rotating Speed (RPM)||650/1300-180||475/950-87||475/950-87||430/860-60||357/714-50|
|Mixing time (Min.)||8-10||8-10||8-12||8-10||8-12|
|Motor power (KW)||14/22-7.5||30/42/11||40/55/11||55/75/15||83/110/22|