Fresadora pulverizadora SMF-600 SPC/WPC con cámara turborotor

The SPC/WPC pulverizer milling machine device includes a feeding mechanism and a grinding mechanism:
A1: El mecanismo de alimentación del molino de plástico SPC incluye un marco. El marco está equipado con un comedero. Los dos extremos del comedero están provistos respectivamente de un tanque de almacenamiento y un canal de transporte, y una cinta transportadora entre nervaduras adyacentes tiene un imán;

A2: The feeding hopper of the SPC Pulverizer mill is located below the conveying trough. The material crushed into lumps is sent to the grinding mechanism through the feeding mechanism for grinding, and the magnet set on the conveyor belt can absorb the material in the conveyed material. Iron impurities, reduce the content of iron impurities entering the next process, avoid the damage of iron impurities to the next equipment, and improve the quality of SPC raw materials;

A3: SPC pulverizer mill mounting plate; one side of the first motor is fixedly installed with the mill shell at the top of the mounting plate, and the inner movable sleeve of the mill shell is equipped with the first rotating shaft, the SPC plastic mill, through A cooling box and a baffle plate are set on the conveying pipe. By conveying the flowing water inside the cooling box, the inside of the conveying pipe can be cooled down and prevent the SPC plastic from flocculating, agglomerating, not feeding, and turning off the fan bearing. And other issues, thereby improving the practicality of the mill.