Description

Grinding machine structure and features:

A1: The Plastic recycling pulverizer is fully automated, with automatic feeding, discharging, sorting, and grinding; the newly designed special bearing seat reaches high speeds, and the grinding process is fully sealed without dust leakage.

A2: The smaller cross-section of the grinding chamber of the Plastic recycling pulverizer allows the material to be immediately caught, ground and removed as soon as it enters, which avoids the decomposition of the material due to temperature rise, resulting in higher output.

A3: The temperature of the rubber material after grinding by the Plastic recycling pulverizer is below 60 degrees. The powder is fine and elastic. Its physical properties will not be destroyed. The ground powder can be directly added to new materials for use.

A4:The grinding disc of thePlastic recycling pulverizer can be adjusted simply by using a feeler gauge and adjusting bolts. The cooling system of the grinding chamber of the grinding disc adopts a combination of air and water cooling.

A5: The Plastic recycling pulverizer has a power of 37KW-110KW and can work 24 hours a day. The operator only needs to directly feed the leftover materials into the feeding barrel, and it can be automatically ground into powder. It is very simple and convenient to operate by one person.

A6: The advantage of the Plastic recycling pulverizer is that in terms of waste addition, each hand can add 3-5KG more powder, and each foaming bed can increase 3-5mm without causing white spots. The production time of the machine is short, the output can be increased by 10-20%, and the mixing shaft is not easy to break.

A7: The Plastic recycling pulverizer uses stainless steel to make a double-layer pipe cyclone, which occupies a small area and is easy to maintain. New tool structure increases output and overcomes tool wear resistance.

Technical Parameter