SMF-600/800/1000 Waste plastic SPC flooring sheet grinding miller machine

Waste plastic grinding miller is especially suitable for PVC,SPC,WPC and various rigid, soft, elastomer, low-temperature materials, and film materials. , Sheet thermoplastic materials. According to the classification of the grinding materials, the mills are mainly divided into two categories: rotor (turbine) mills and disc mills.

Spread the love


Process of plastic miller machine:
Horizontal Power Crusher——Air Conveyor System (or Screw Feeder)——Metal Detector (Magnetic Frame)——-SMF Series Plastic Pulverizer— –Screw Feeder——Silo (Weighing Packaging System)

The principle of plastic miller machine:
The soft and hard PVC, SPC, WPC recycled materials are crushed to 8-10mm flakes by a horizontal strong crusher, and the metal is removed through a metal detector or a magnetic frame through the air conveying system, and the recycled materials after removing the metal enter through the material head. The main machine of the pulverizer is ground into fine powder under the action of the fixed knife and the moving knife inside the grinding chamber. The powder is driven by the fan and enters the vibrating screen for screening. The material port is conveyed to the silo or weighed and packaged by the screw feeder.

Application areas:
The PVC waste recycling miller is designed by our factory using German technology and our own production experience. PVC pulverizer is used to pulverize waste SPC floors, PVC ceilings, PVC pipes, PVC profiles, and PVC marble slabs into fine powder. The capacity can be from 100-900kg/h.

A1: The working part of the plastic grinding machine is the cutter head in the grinding chamber. The plastic particles are ground into fine plastic powder by the high-speed rotating moving cutter head and the stationary wallboard cutter head, which are drawn out by the suction fan, while the larger particles continue to be ground. In this way, the plastic pulverizer reduces the load of the cutter head, improves the grinding efficiency, and enables the powder to be cooled evenly.
A2: Milling machine case—the main machine is equipped with air and water circulation cooling system, as long as the water supply is guaranteed, it can work 24 hours a day without interruption.
A3: Grinding machine grinding disc—high-quality imported die steel tool, high output, good wear resistance, twice the life of ordinary grinding disc, and easy to replace, can be used repeatedly after grinding.
A4: The temperature controller and water vapor control device of the pulverizer—-can accurately measure the temperature in the pulverizing cavity, so as to avoid the plastic melting and agglomeration due to the excessive temperature in the cavity.
A5: Grinding disc adjuster for grinding mill—The gap between the grinding disc moving knife and the fixed knife adopts specific adjustment (completed in one minute). It is new and simple, and it is easy to control the size of the powder. The size of the powder can be adjusted from 10 to 150 meshes. Through special adjustment Installation, convenient and fast (just 2-3 minutes).


Technical Parameter

Model SMF-380 SMF-450 SMF-500 SMF-600 SMF-800
380mm 450mm 500mm 600mm 800mm
Lade disk
2pcs 2pcs 2pcs 2pcs 2pcs
4500rpm 4500rpm 4500rpm 4200rpm 3700rpm
Power main motor 30Kw 30Kw 37Kw 37Kw 45Kw
  blower 3Kw 4Kw 3Kw 4Kw 5.5Kw
Shaker size 800mm 800mm 800mm 1000mm 1200mm
Output size 10-100 mesh 140μm-1400μm
Cooling type Air and Water
(For 30mesh)
PVC: 200kg PVC: 250kg PVC: 250kg PVC: 350kg PVC: 500kg
  P E: 150kg P E: 180kg P E: 200kg P E:250kg P E: 300kg
  P P:70kg P P: 80kg P P: 100kg P P: 160kg P P: 200kg
2500x2000x3000 2600x2100x3000 2600x2100x3000 2800x2300x3000 3200x2800x3200

Recommended Products

Please enter your message