BEISU Factory Turbo Plastic PVC pulverizer miller machine manufacturer with rotor chamber mills

Plastic PVC pulverizer miller is mainly used in the field of soft and hard PVC, SPC, WPC recycling, such as the recycling of pipes, profiles, sheets, boards, and waste wood-plastic floors and wallboards. Especially the grinding of processing and grinding thermoplastic recycled pellets; for example: crushing waste SPC floors, PVC ceilings, PVC pipes, PVC profiles, PVC marble slabs into fine powder.

Spread the love


The process of plastic PVC pulverizer manufacturer:
Horizontal Power Crusher——Air Conveyor System (or Screw Feeder or Belt Conveyor)——Metal Detector (or Iron Removing Conveyor Belt or Small Magnetic Frame)—— –SMF Series Waste Recycling Plastic Mill—–Screw Feeder——Silo (Weighing Packaging System)——-High Speed ​​Mixer——- —Plastic extruder

The structure of plastic PVC pulverizer manufacturer:
The pulverizer consists of a main engine, a fan, a feeder, a separator, and a piping system for a powder collector. The material enters the body from the feeding hopper through the vibrating feeder, and is driven by the motor through the pulley to drive the main shaft and the turbine fastened to the main shaft to rotate at a high speed. The high-speed rotation of the cutter head driven by the main shaft has a strong collision with the fixed knife, and the material is cut into powder. The dust collector is discharged.

The working principle and characteristics of plastic PVC pulverizer manufacturer:
A1: The working part of the mill is the cutter head. The high-speed particles are partially crushed after hitting the toothed plate, and are extracted by suction, while the larger particles continue to be impacted and crushed and then extracted. In this way, the load of the cutter head is reduced, the grinding efficiency is improved, and the powder can be evenly cooled.

A2: Low temperature is the main advantage of the mill. By thermal power equivalent: converted into 860 kcal heat after working per hour. The machine is externally exhausted, with an air volume of 50m3/kw, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling.
Requirements: The inlet temperature of the cooling water is not more than 25℃, and the outlet water temperature is not more than 45℃. In summer, the cooling water flow should be appropriately increased to reduce the temperature.

Technical Parameter

Model SMF-380 SMF-450 SMF-500 SMF-600 SMF-800
380mm 450mm 500mm 600mm 800mm
Lade disk
2pcs 2pcs 2pcs 2pcs 2pcs
4500rpm 4500rpm 4500rpm 4200rpm 3700rpm
Power main motor 30Kw 30Kw 37Kw 37Kw 45Kw
blower 3Kw 4Kw 3Kw 4Kw 5.5Kw
Shaker size 800mm 800mm 800mm 1000mm 1200mm
Output size 10-100 mesh 140μm-1400μm
Cooling type Air and Water
(For 30mesh)
PVC: 200kg PVC: 250kg PVC: 250kg PVC: 350kg PVC: 500kg
P E: 150kg P E: 180kg P E: 200kg P E:250kg P E: 300kg
P P:70kg P P: 80kg P P: 100kg P P: 160kg P P: 200kg
2500x2000x3000 2600x2100x3000 2600x2100x3000 2800x2300x3000 3200x2800x3200

Recommended Products

Please enter your message